ACS Minima Espresso Machine
To make espresso well you need a few ingredients, great fresh coffee, a good grinder and a machine capable of getting the best from the first 2 ingredients. It needs to provide water at the correct temperature and the Minima uses the much better and expensive system of quality stainless steel (AISI 316L) boiler for brewing and a separate service boiler for steam/hot water.
The Minima is a Dual boiler machine, this separates brewing and steaming, using a more sophisticated and very accurate system (a PID controller) for managing temperature. The brew boiler on the Minima is a perfectly sized 800 ml and controlled by it’s own PID function.
It uses the beautifully distinctive and quality E61 group head design. The E61 group allows for a continuous flow of water from the brew boiler to the group and back (the thermosyphon), to keep the group at the correct temperature for making coffee.
Considering the compact size of the Minima, the service boiler is unusually large. It has one of the largest, if not the largest service boiler in the prosumer PID controlled dual boiler category. A massive 2.3 litres makes it a hugely capable steamer and PID electronic temperature control, run as a full power on/off controller to improve performance, is far more reliable than older style pressurestats.
The steaming is so powerful ACS provide 2 steam tips with the Minima, a large 3 hole for experienced users and a slower smaller 2 hole tip for the less experienced.
Last Shot Protection (LSP)
The Minima LSP prevents the low water system from turning off the pump during a shot and the shot can continue until you end the shot. Only then will the machine say H2O and disable the pump so no further shots are possible until you fill the tank. This way a shot is never wasted just because of low water in the internal water tank.
Minima has a vibration pump has been carefully chosen to deliver an appropriate rate of flow, whilst being as quiet as possible. Vibration pumps do make a distinctive noise, but placement and machine design have reduced the noise and eliminated any rattles that are all too common on some vibration pump machines.
- 2 Portafilters for 1 or 2 cups
- Blind Filter
- 2 and 3 hole steam tip
- Group brush
- Small espresso cup stand
- Detachable mains lead
|Dimensions (HxWxD)||370 x 270 x 445 mm|
|Power Supply||230 V-50Hz|
|Power||2400W – simultaneous heating mode / 1400W – brew boiler priority mode|
|Water Tank||2.6 l|
|Service Boiler Capacity||2.3 l|
|Brew Boiler Capacity||800 ml|
|Boiler Material||AISI 316 l Stainless Steel|
|Pump Pressure||10 to 15 bar|
|Group Head||Single E61 solenoid group (58mm)|